Total Pageviews

Thursday, November 4, 2010

Starting out. part II


So this is Starting out round two. Or episode two.
Previously in this blog I gave a quick overview on the tools and setup necessary for painting miniatures. Then I moved on to cover the convenience of starter sets and a quick plug for Privateer Press. Both for their miniatures lines and their P3 line of tools and paints. The latter of which I prefer above other lines.
Before I get started, I would like to introduce you to Bill. Bill is the local Press Ganger and the generalissimo of the Dragonslayer slow grow league. I call it the Slowburn league.
Now then. You got your miniatures. I presume the plastic starter set for your faction. If you got a metal set don't worry as I will be covering metal miniatures soon.
For this post I will cover the cleaning of the Juggernaut. I would try to hurry things along. However, I require the aid of Cat (pictured in previous post) to take the pictures that make this blog a little more interesting to read. Hopefully I will even post videos, but that requires a lot more effort and a video camera. I am working on it.
Now then technical and technological rants aside lets get to cleaning that Juggernaut.
I assume you bought that Khador Starter set. If not, no worries, the cleaning procedures still apply. For this session we will need the following tools:
  • Pen knife or scalpel. Possibly X-acto, but that is up to you. I cant say this enough. Be CAREFUL with these knives!!! The blades are very, very, very sharp. And for that reason they can cut you without causing pain. I would hate for someone to bleed to death ( I am exaggerating. I hope).
  • Files. For plastics I recommend steel cut files. brand is unimportant. Though I had good experience with the Testors Modelmasters set. Very versatile and good on plastics and metal.
  • And of course the unsung hero of modelers, painters and electricians. Clippers also known as wire snips or cutters. The P3 ones I recommend as they can cut through brass rod. I haven't tested them on paper clips yet. (Paper clips are a good way to find out if you bought a good set of clippers. Considering how much they cost I always recommend buying a set that can cut through a paper clip with ease.) And the warning: Be very CAREFUL with these. This tool is both a cut and pinch hazard. Not only that, but the parts that you are clipping off can fly at unexpected velocities and cause serious injury. Like poking an eye out.
So these were the tools. Lets try to use them eh? Well. Ok, but first I want to introduce you to what it is that we are trying to cut, clip and file away along with an explanation as to why its important.





Sorry the clippers are trying to clip. ( Computer graphics humor.No? )

And here is our first model the Juggernaut:As you can see our Juggernaut is straight out of the box and in pieces. That and there are these ridges that seem to run across the pieces and the main body also has knob sticking out of it.
A brief explanation: The ridges are called mould lines. They appear where the two halves (in the case of a two part mould. Some mould have more parts) come together and are caused when material leaks out or is squeezed through. In metal miniatures this is because of the centrifugal force exerted on the metal during the spin casting process. In plastics and resins its because of the pressure of the injection casting process. Thermoplastics as i believe the case is here are cast like metal. The knob i mentioned earlier is either the main feed to the part or an extra large vent. More than likely its part of the feed that allows the mould cavity to be filled with the casting material. in the case of metal miniatures you will more than likely find the metal that got into the vents. these were cut into the mould to allow for air to escape the cavities.

Now lets start clipping our way to a clean model.
First we need to use the clippers for the feeds and any large amount of flash that needs to be removed. You can use a knife instead, but trust my experience on this. Clippers make the process go faster.
Flash: What is it? Well most of us currently recognize it as a web development tool by Adobe. In the case of miniatures it is the material that is not a part of the model that you are working on. It's presence is a byproduct of the manufacturing process and can be used to gauge the skill of a caster. The more skilled a caster the less flash the model has. Speaking from personal experience we have ways to reduce flash. Flash for the purposes of this blog includes vents, metal the sticks out along the mould line and feeds. I will show you more examples in the future.
Now that we have clipped the Feed off. Lets clean it up a bit with the knife to level the part and ready it for smoothing with a file.It's worth mentioning that my methods were learned from articles that I have read and questions that i have asked professional painters. Painters such as the studio pros at Privateer Press and some of the painting competition winners.
As an aside you should check out McVei studios, and read Mike's blog. He is a really cool guy, I even got to ask him some questions which he was very gracious in answering. I will add the link to Studio McVei soon. I will be on the side of the blog with the other links.
Moving along.
Now we go to filing the pieces. Although in some cases it is more expedient to use the knife. The following pictures illustrate what I did.
Hint: If you bought a large pack of files. (Not a bad idea. Really!) You will have various shapes and sizes. To make things easier for you and not take up too much space I will just give you the general principles involved. Use large flat files for smoothing large flat areas of a model. This will usually be the feet or flat parts that need to be joined. The round files are useful for cleaning the curved sections of a model. Believe me when I say this, you will use most of your files. the small square and triangular files get into places that the larger files can't fit in. Using the large files where possible will save you a lot of time.

Cleaning the boiler. (pictured below) Was quite a challenge. There were more mould lines than I thought necessary and they also intersected. For extra difficulty the boiler also has a lot of rivets and fine detail that looks like small tubes/ steam pipes. In a way it does make me wish that I was working on a metal model.

Cleaning the legs requires a combination of files and a sharp, but blood thirsty knife. I didn't cut myself, thankfully, the blade was still sharp though.
There is Sharp and there is very very sharp. In my personal experience I have found that it is best to use very very sharp blades. A cut heals faster if it was caused by a very sharp blade than a dull one. Needless to say it is best to avoid getting cut even if it means that you have to keep a vial of animal blood handy to keep your knife happy.

The rest pf the parts were a variation on a theme.

In the case of the Frost axe and the left hand i just need to use the knife. the arms themselves were easy as well. and the head barely needed any work. In short it was all down to cutting down the bit where the part was fed and smoothing and "polishing" the rest. The knuckles were a bit troublesome as it is a plastic modes and thus soft compared to a metal piece.

A shot of the pieces all cleaned up. Well with the excess material removed.
Next episode:
I will be covering posing for the Juggernaut and also explain what the sticky tack is for.

PS
Please answer the polls at the bottom and leave comments. They are useful for a variety of reasons.

Tuesday, November 2, 2010

Starting out.

So here you are looking at the second post in about a week. Well as this is a blog about painting miniatures I had to step away and take some pictures. Then edit them in photoshop. ( it's what i have on my machine. I use what i have.) But, I digress. So you are reading this and possibly thinking that this had better be a good blog. I can tell you that there is better. though not as often updated. Go to www.brushthralls.com. they have some really nice tutorials. Really. I looked at them myself.
Before I begin please allow me to introduce some friends.
Sam, A Hordes palyer. Prefers the Legion of Everblight.

And Cat, a Warmachine player. Prefers the Cygnaran army.

And of course there is me. I am a member of the Khadoran party. he he he he

Now then. Lets begin.
This blog however is actually geared to people that are in fact just starting out with this new thing called miniatures games. Actually its been around for quite some time, but, once again I digress. Needless to say: Lets start at the beginning.
So what will you need? Well a good lamp to see by and a nice table that you can be comfortable at. I assume you have those as well as the chair. Remember I assume that you are just getting started and don't want to spend on the fancy tools that pros use. Well not yet anyway. I mean, we are talking about $30 + brushes and full spectrum lamps etc. I will talk about those, but lets get started with the basics first. That way you can get the most out of your $30-60 dollar brushes later on in time. (I'm not kidding about the brushes, I looked up the prices and asked my friends in the industry)
So back to the things that you will need. Table, chair, lamp ( you can use sunlight if you have it. I live in the Pacific Northwest so I don't have it available all year.)
Above are the tools I commonly use to clean, assemble and paint my miniatures. They are as follows and in to particular order. Two Cups, one for clean water to dilute paint with and one for cleaning brushes with. Honestly you need any container that can hold water. Then there are the brushes. These usually steal the show, for our purposes I will cover two sizes initially. Just to get you started. Then there is the pin vice. Think of this handy little tool as a hand drill. Actually that is exactly what it is. Its makes assemblyn some models a lot easier, and I will cover its use in a later tutorial. Next up we have the files. The ones pictured above are cut steel files. You can also get diamond files as well, I prefer to have both available. For now, I will cover the cut steel ones as they are more versatile. Well at least in my opinion. The files are followed by the pen knife commonly referred to as an X-acto or scalpel and a pair of clippers. Both of these tools are indispensable when it comes to cleaning your models. Not to mention converting them. Speaking of converting and assembly is included, two part epoxy putty is always handy to have. Its useful when you need to add a little extra detail or to fill in gaps. Then i also recommend Sticky tack, it helps in pre-assembling and posing your model before gluing it together. Speaking of which a good glue is important. For the vast majority of projects I use a cyanoacrylide glue. Err its commonly called super glue, just be careful as it was originally formulated to bond human skin.
And that brings us to the primer and paints. There are numerous opinions as to what primer to use as well as paints, for the sake of brevity I recommend Duplicolor or the P3 brand as the formula is identical (or so I hear) and bonds to metal really well. that and it shrinks quite well and is very durable. As for paints I will be using the P3 range. why not anyone else's? Well again its for brevity's sake and i really really like the P3 line. They come out nice, are reasonably priced and with the exception of the metallic set, are liquid pigment. This is very handy when you want to mix or thin them down.
I can hear you asking about the shiny metal rods and the laptop. Well the rods are used for putting a model together. I will cover them in depth later. And the laptop, well its useful to be able to look up a reference picture online for effects purposes.
Now then. You have your table, lamp and comfy chair all set up. Maybe you have some music in playing. Computers are handy that way.
What are you going to paint?
Well I for one got my hands on the Warmachine Khador Box set by Privateer Press.

And here are the contents:

Starter boxes are a great way to start any army. It Just so happens that Privateer doesn't limit new players to two factions, hence my bias. In case you were wondering.
As I proceed to type I assume that you are reading this for the second time. After you happened to purchase a Starter box of the faction of your choice.
There seems to be some question as to what to get. I recommend the faction that you think looks the best. Hey they are your models after all.
Well that's it for this post.

In my next post we will begin with the robot to the right, commonly referred to as a Juggernaut. We will then proceed to the Destroyer next to it and finally finish the set with the warcaster on the left.

Thursday, October 28, 2010

Welcome.

Welcome to "A brush, a paint and a mini". This is a blog that started as a conversation about miniatures painting. And I decided that since I was getting back into miniatures war gaming and the associated hobby. It would be best to also to start a blog about it, share some tips on painting and track the progress of my friends as they get into the hobby aspect of aforementioned miniatures war games.
I will mostly be discussing cleaning, assembling and painting of individual models as well as whole armies In addition to conversion ideas and custom bases. However this isn't just another painting blog. Mostly because it will aso track the progress of the rest of the members of the group that I affectionately refer to as the "Slow Burn League". A group originally intended to be a slow growth league meeting in Bellevue's Dragon's Layer Comics and games store.
That said there will be plenty of pictures to come as well as links to other blogs on the subject.